At 18" tall our Micro Copper-bonded EZGroundRod® tool simplifies getting a ground rod into the soil. With the same copper-bonded steel ground rod featured on our larger tool, it will provide an excellent, low resistance path to ground. Its 6" slide hammer will easily get the rod both in and out of the ground. It features a high carbon steel core and tip that provide superior strength when driving. The copper coating will not crack when bent or tear when driven. It's compact size makes it easy to use, carry, and store. The Micro Copper-bonded EZGroundRod® gets better results than steel, especially in difficult soil conditions. Any electronic locating equipment can connect directly to the shaft. Perfect for any temporary grounding needs like grounding a truck or locating underground utilities. Please use all necessary safety gear when using this tool. Patent 11311996
Micro Copper-bonded EZGroundRod®
The point on the end of the tool is very sharp to allow entry into the ground so proceed with caution when hammering into the ground. Never hammer the tool deeper than 6". Keep your tool clean and free from corrosion because this could affect your signal. Electrical insulated rubber gloves should be used to protect users from electrical shocks and burns.
The Micro EZGroundRod® is NOT meant to be used to drive through cement, rock, frozen ground or asphalt. This can break the tool. It is intended to be used on varying natural surfaces such as sand, gravel and dirt.